ProCurve 420 Manual de usuario descargar pdf (Pagina 34)

Software Fixes

■ System Log — The System Log does not show an entry when the 802.11g radio channel is

changed to “auto.” (18-00209, 18-00277)

Release 2.0.37

Problems Resolved in Release 2.0.37

■ CLI/Web — Using the Web interface, the status of client stations on the Station Status page

is not refreshed until the Web interface is re-opened. (18-00213)

■ CLI/Web — The CLI command max-association? displays the accepted value range as 0 -

2007, but the maximum valid value is 128. (18-00266, 18-00325)

■ CLI/Web — When using the CLI speed command with the access point set to “b only” mode,

the 11 Mbps option is missing. (18-00368)

■ Encryption — In WPA Dynamic Key mode, there is no broadcast key packet after the refresh

rate has expired. (18-00340)

■ Encryption — In WPA Pre-shared Key mode, there is no broadcast key packet after the

refresh rate has expired. (18-00341)

Release 2.0.34

Problems Resolved in Release 2.0.34

■ CLI/Web — Sun Java support added to the Web user interface.

■ Radio — Interoperability issues caused by invalid packets.

■ Encryption — Two WPA clients fail to ping each other when the multicast cipher is set to

“WEP”. Using WEP as the multicast cipher results in WPA clients not being able to

communicate with WEP clients. (18-00221)

Release 2.0.29

Release 2.0.29 was the first software release for the HP ProCurve Wireless Access Point 420.

1 2 ... 29 30 31 32 33 34 35 36 37

Sin comentarios

ProCurve 420 Manual de usuario Pagina 34