ProCurve 420 Manual de usuario descargar pdf (Pagina 25)

Software Fixes

Release 2.1.7

Version 2.1.6 was never released.

Problems Resolved in Release 2.1.7

■ CLI/Web — Management VLAN setting reverts to untagged if the status of SSH or HTTPS is

changed. (18-01179)

■ CLI/Web — In the Web interface, a change in the status of the Telnet server is not saved to

the access point configuration file.

■ System — 802.1x authentication failures occur when a RADIUS server is configured to

enable use of a State attribute in an Access-Challenge interaction (per RFC 2865).

■ System — SSH and Telnet settings are not saved properly in the access point configuration

file. (18-01181)

■ System — Due to regulatory changes, 802.11g operation has been permitted in Malaysia

since January 2005. (18-01184)

■ System — Configuration for static or dynamic VLAN assignment is not saved to the access

point configuration file. (18-01185)

■ System — When the management VLAN is configured as dynamic and tagged, WPA stations

generate MIC failures and countermeasures due to invalid packets. (18-01186)

■ Radio — When the radio is operating in b-only mode, the configured channel setting reverts

back to channel 1. (18-01182)

Release 2.1.5

Problems Resolved in Release 2.1.5

■ Interoperability — Broadcom clients with a driver version 4.10.36.0 cannot connect with

the access point when using WPA security. (18-01176)

■ Authentication — An extra 8-byte data pad exists within first EAPOL Key packet from the

access point to a client during a WPA 4-way key exchange process. (18-01177)

■ Authentication — When using software release v2.1.4, roaming fails for SVP clients using

WPA-PSK or WPA2-PSK security. (18-01178)

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 36 37

Sin comentarios

ProCurve 420 Manual de usuario Pagina 25