ProCurve 420 Manual de usuario descargar pdf (Pagina 18)

New Features

New Features in Release 2.1.2

The table below summarizes the new features in this release. The new features are described in detail

in the sections following the table.

Broadcast/Multicast Limit

The access point can become overloaded when multicast or broadcast traffic from the Ethernet port

exceeds the configured multicast data rate. To avoid this condition, a broadcast/multicast traffic

limiting function can be enabled on the Ethernet interface. When enabled, the function limits the

multicast and broadcast traffic from the Ethernet port at a rate, based on the configured multicast

data rate, that cannot overload the wireless interface.

Syntax: [no] bc-mc-limiting enable

For example, to enable broadcast/multicast traffic limiting:

HP420(if-ethernet)#bc-mc-limiting enable

To disable broadcast/multicast traffic limiting:

HP420(if-ethernet)#no bc-mc-limiting enable

To display the current broadcast/multicast limit setting, use the show bc-mc-limit command.

Feature Summary

Broadcast/Multicast Packet Limiting See “Broadcast/Multicast Limit” on this page.

Pure 11g Only Mode See “Pure 802.11g Mode” on page 13.

HP420#show bc-mc-limit

BroadcastLimiting Information

===========================================================

Status: Enable

No. of broadcast frames allowed: 17 frames per second

Broadcast frame discard count: 0

===========================================================

HP420

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 36 37

Sin comentarios

ProCurve 420 Manual de usuario Pagina 18