ProCurve 2610-PWR Información técnica descargar pdf (Pagina 425)

100

101

C-29

Troubleshooting

Using Logging To Identify Problem Sources

Enabling or Disabling Logging to Management Sessions and SyslogD

Servers. Use this command when you want to do any of the following:

■ Disable Syslog logging on all currently configured SyslogD servers with-

out removing the servers from the switch configuration.

■ Re-enable Syslog logging if it is disabled and there is at least one SyslogD

server currently configured in the switch.

■ Enable or disable logging output to the current management-access ses-

sion.

For example, figure C-10 shows the process for checking the current Syslog

status and then disabling Syslog logging.

Syntax: [no] debug destination < logging | session >

logging

The no form of the command disables Syslog logging,

but retains the currently configured SyslogD server

addresses in the switch configuration.When Syslog log-

ging is currently disabled with one or more SyslogD

servers configured, this command enables Syslog log-

ging on the switch. The show config command output

includes the SyslogD server IP addresses currently con-

figured in the startup-config file.

session

Enables and disables debug logging to the current ses-

sion. The “current session” is the session that most

recently executed debug destination session on the switch

(since the last reboot). This makes it easy to move

session logging from one session to another.

1 2 ... 420 421 422 423 424 425 426 427 428 429 430 ... 468 469

Comentarios a estos manuales

Sin comentarios

ProCurve 2610-PWR Información técnica Pagina 425

Comentarios a estos manuales

Relacionado con productos y manuales para Software ProCurve 2610-PWR