ProCurve 2610-PWR Información técnica descargar pdf (Pagina 408)

100

101

C-12

Troubleshooting

Unusual Network Activity

Figure C-2. Example of How To List the Global and Server-Specific Radius

Encryption Keys

Also, ensure that the switch port used to access the RADIUS server is not

blocked by an 802.1X configuration on that port. For example, show port-

access authenticator < port-list > gives you the status for the specified ports.

Also, ensure that other factors, such as port security or any 802.1X configura-

tion on the RADIUS server are not blocking the link.

The authorized MAC address on a port that is configured for both

802.1X and port security either changes or is re-acquired after

execution of aaa port-access authenticator < port-list > initialize. If the port is

force-authorized with aaa port-access authenticator <port-list> control authorized

command and port security is enabled on the port, then executing initialize

causes the port to clear the learned address and learn a new address from the

first packet it receives after you execute initialize.

A trunked port configured for 802.1X is blocked. If you are using

RADIUS authentication and the RADIUS server specifies a VLAN for the port,

the switch allows authentication, but blocks the port. To eliminate this prob-

lem, either remove the port from the trunk or reconfigure the RADIUS server

to avoid specifying a VLAN.

Global RADIUS Encryption Key

Unique RADIUS Encryption Key for

the RADIUS server at 10.33.18.119

1 2 ... 403 404 405 406 407 408 409 410 411 412 413 ... 468 469

Comentarios a estos manuales

Sin comentarios

ProCurve 2610-PWR Información técnica Pagina 408

Comentarios a estos manuales

Relacionado con productos y manuales para Software ProCurve 2610-PWR