ProCurve 2610-PWR Información técnica descargar pdf (Pagina 222)

100

101

Quality of Service (QoS): Managing Bandwidth More Effectively

Using QoS Classifiers To Configure QoS for Outbound Traffic

no qos device-priority < ip-address >

Deletes the specified IP address as a QoS classifier.

show qos device-priority

Displays a listing of all QoS Device Priority classifiers

currently in the running-config file.

For example, suppose you wanted to assign these DSCP policies to the packets

identified by the indicated IP addresses:

IP Address DSCP Policies

DSCP Priority

10.28.31.1 000111 7

10.28.31.130 000101 5

10.28.31.100 000010 1

10.28.31.101 000010 1

1. Determine whether the DSCPs already have priority assignments, which

could indicate use by existing applications. This is not a problem if the

configured priorities are acceptable for all applications using the same

DSCP. (Refer to the “Note On Changing a Priority Setting” on page 6-61.

Also, a DSCP must have a priority configured before you can assign any

QoS classifiers to use it.)

The DSCPs for this

example have not yet

been assigned an

802.1p priority level.

Figure 6-11. Display the Current DSCP-Map Configuration

6-32

1 2 ... 217 218 219 220 221 222 223 224 225 226 227 ... 363 364

Comentarios a estos manuales

Sin comentarios

ProCurve 2610-PWR Información técnica Pagina 222

Comentarios a estos manuales

Relacionado con productos y manuales para Software ProCurve 2610-PWR