ProCurve 6400cl Guía de usuario descargar pdf (Pagina 63)

100

101

Static Virtual LANs (VLANs)

Configuring VLANs

To Change VLAN Support Settings

This section describes:

■ Changing the maximum number of VLANs to support

■ Changing the Primary VLAN selection (See “Changing the Primary VLAN”

on page 2-34.)

■ Enabling or disabling dynamic VLANs (Refer to chapter 3, “GVRP” .)

1. From the Main Menu select:

2. Switch Configuration

8. VLAN Menu …

1. VLAN Support

You will then see the following screen:

Figure 2-12. The Default VLAN Support Screen

2. Press

[E] (for Edit), then do one or more of the following:

• To change the maximum number of VLANs, type the new number

(1 - 256 allowed; default 8).

• To designate a different VLAN as the Primary VLAN, select the Primary

VLAN field and use the space bar to select from the existing options.

(Note that the Primary VLAN must be a static, port-based VLAN.)

• To enable or disable dynamic VLANs, select the GVRP Enabled field

and use the Space bar to toggle between options. (For GVRP informa-

tion, refer to chapter 3, “GVRP” .)

Note For optimal switch memory utilization, set the number of VLANs at the

number you will likely be using or a few more. If you need more VLANs later,

you can increase this number, but a switch reboot will be required at that time.

3. Press [Enter] and then [S] to save the VLAN support configuration and return

to the VLAN Menu screen.

2-23

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 717 718

Comentarios a estos manuales

Sin comentarios

ProCurve 6400cl Guía de usuario Pagina 63

Comentarios a estos manuales

Relacionado con productos y manuales para Los conmutadores de red ProCurve 6400cl