ProCurve 2510G Series Información técnica descargar pdf (Pagina 250)

12-18

Configuring for Network Management Applications

Using SNMP Tools To Manage the Switch

SNMP Notification and Traps

The switches covered in this guide support the SNMPv3 notification process.

They also support version 1or version 2c traps. For more information on

version 1 or version 2c traps, see “Trap Features” on page 12-20. The SNMPv3

notification process allows for the messages passed to be authenticated and

encrypted if you choose. To set up a SNMPv3 notification there are three steps:

1. Establish a Notification with the snmpv3 notify command.

2. Point the notification to a Address with the snmpv3 targetaddress com-

mand.

3. Establish a parameter record for the target address with the snmpv3

params command.

Syntax: [no] snmpv3 notify < notify-name > [ tagvalue < tag-name > ]

This adds or deletes a notification request. To remove

a mapping you only need the

notify-name.

[no] snmpv3 targetaddress < addr-name > params < parms-name>

< IP-Addr >

Add or delete an address where notification messages

are sent.

filter < none | debug | all | not-info | critical >

This filter messages to restrict type of messages

transmitted to address. (Default: none)

udp-port < port >

This specifies the UDP port to use. (Default: 162)

port-mask < mask >

Used to specific a range of UDP ports. ( Default: 0)

addr-mask < mask >

Used to specify a range of address to transit notify

messages. ( Default: 0)

retries < value >

Number times to retransmit a message when no

response is reviewed. (Default: 3)

timeout < value >

How long to wait for a response for the target. (Default:

1500) ( — Continued — )

1 2 ... 245 246 247 248 249 250 251 252 253 254 255 ... 411 412

Sin comentarios

ProCurve 2510G Series Información técnica Pagina 250